OK, welcome today. We're going to install and mess around with Angry IP scanner.
First thing we need to do is open up our terminal.
I'm gonna blow this up so you can see it.
But actually I got ahead of myself.
We're actually gonna go to Firefox and download Angry IP Scanner.
So I'm just gonna do a quick Google search. So we'll go to google.com
and then we are just gonna do Angry IP scanner just like that
and we can download it right here. So we have that download button and
there a Windows Mac and Linux. We want the Linux version right there
and we are operating on Cali with a WM system.
So I'm going to click that one right there.
It's going to say to continue to download
and continue right there
and there we go. It is off is downloading.
It doesn't take much the list that's already there so I can show it in the folder
in our downloads right there. So now we're gonna go back to the terminal
and it's going to go to town and do its thing. Now, we should have that downloaded.
Now, if
I click
on this right here.
I type
angry. You can see now that we have angry IP scanner right there.
I'm just gonna click on that
hit next,
next again. We're just gonna hit next through all this and then I close
and here you go. We've got our angry IP scanner sitting right here. Now, I'm gonna
have to do something. I wanna scan something and because
Kali is on our virtual machine, I actually need to restart a new virtual machine.
So I'm gonna start up my trusty Coptics
too. It's gonna take a second to get uploaded
or I shouldn't say uploaded, it's gonna take a second to get started.
You can see here. I had it on the other screen.
I'm going to start running the Ike
Optics two to let it scan through there
and it'll just take a second for it to start booting up.
Now,
I have the
optics two running on the same Subnet
as I have my
tally box and I can show you that
virtual locks here. You can see that my key
optics
is right here. If I go to settings
and then network, it's running on net network just like that.
And then Cali if I do the same thing, settings
network, it's on that network.
And that's important because if it's on a different Subnet, it will never see
each other. And that's a bad thing. So
next thing I need to do because I'm running on
that specific virtual machine is I'm just gonna do
an if config to figure out where I am
as far as IP S and you can see here that I'm running on 10.0 0.2 0.9.
Now
with angry IP scanner because of it's a lightweight
way of doing it.
I'm just gonna put 10.0 0.2 0.0 through 255
that should scan the entire final octet or the slash 24 Cider.
I'm just gonna hit start right there and let it go to town
and
expand this out. You can see
partially
see if I can blow that up for you guys. I can't, it's not gonna let me,
but you can see that it's going through and we've got 10.3.
So 14 is against
average time per host 0.06 seconds. Host scan 254
5 hosts alive two ports open.
So we set that and then you can see rare with the green. Those are active machines.
Now,
we have 2.5 and we have 2.3 and if I scroll down there shouldn't be any others
and there's not
right.
So
we can see that
2.3 has port 80 open and two volt five has 84 3. Now, if I go back to that terminal,
you may know that 2.9 is my own machine
and it is not unlike in map showing 2.9 is active. So that means two dots 32.5.
Now,
Virtualbox is going to keep alive these first three.
Ok. So 2122 and 23 are all virtual blocks'.
2.5
is going to be Archaeo
machine. But how do I,
how do I make sure of that? Right.
Well,
studio, I can't type today in map
switch capital 0 10.0 0.2 0.5.
And that should
run through and verify that it is like
kop
machine. And we can see here because of all these open ports.
That is an actual machine.
You can also see that it's running Linux version 2.6
one hop distance.
So that is 100% my
two. Now, what happens when we run out of 2.3?
It's gonna come back and it's not going to give us much. So there we go see.
So it's not a real,
it's not really open, it's just VirtualBox saying it is OK.
All right.
So that's angry IP scanner, very quick, very clean, very easy to run through.
I like angry IP scanner because it's, it's so quick,
right? It goes through it.
So like I like angry IP scanner. I do. It's quick, it's clean.
It's give me a gooey interface.
But honestly, I'm, I'm not a big fan of it because of so limited capability.
I mean, it's great if you want a graphical interface, it really is.
But in map does the same thing and much quicker. So let me show you, I'm gonna
blow this up and we'll just do a pseudo which I'm sure you don't even need to do.
And then you do in map and then switch SN
report scans, then switch
to 0.0 slash 24.
And this does a ping scan for all those different IP
addresses on that final octet using that 24 right there.
I hit enter on there. It's gonna ask me why
I think it's gonna go through the motions and we should start to see very quickly
in no time at all. We can see that.
It's telling me a two dot nines up 2.5 up 2.32 0.22 0.1.
Now angry IP scanner goes through and it says, well,
8443 are open. And so I guess if I really wanted to know that I could,
right. So just provide me some, some actual actual items, but
I could do that with
in map as well. And there is a trick for that
and luck
it kind of goes through the motions and you can see and it provides more data too.
I mean, the other one only told me I port 8443 open,
but capital F is gonna tell me I got
everything but it doesn't provide that gooey interface.
So I mean, if I'm doing large networks, I guess I would prefer Angry IP scanner.
Like if I had a lot of items on this, it would be nice.
Kind of go through and go, ok. It's open or it's not,
but for something small, like five or six hosts, I think I prefer in map,
it just does it quicker.
Um, anyway, that's angry IP scanner.
I hope that's helpful and we will see you next time. Thank you everyone.