Hello, everyone.
And this demo, I'm going to show you how to use the NMC Allied Command.
NMC Ally is a command line tool for controlling network manager.
I can't create a new connection or modify an existing one with an AMC ally.
Let's do some examples in order to understand how we can apply an M.C. Allai format.
So first I'm going to check and see Allai.
Is the good thing about clinics here?
If I didn't know.
What should I type after the.
So I the only thing I can hit or press tap twice tap tap.
And after that I can choose what if what I like here.
So I'm going to choose connection here.
Then also if I know what should a tap after and I'm going to hit tap tap twice.
I'm going to choose.
Show here then.
Also.
Right.
No I'm going to hit tap.
Tap.
And as we can see, we have the option active.
So it shows what is the interface or what is a connection that that we have.
And the system is currently active.
So I'm going to choose this one hit enter.
As we can see here, we have this connection and this connection is active.
It's already highlighted in green, as we can see over here.
And the name, it's E.M.S. 33.
And this is the device that disconnection is Yuusuke.
Let's do another example.
NMC Allai, Tap, tap.
I'm going to choose this time device.
And if I don't know what you choose after to tap tap shoes.
Sure.
Dan, I know what you're the type after so I'm going to hit tap tap.
As you can see here, we have this device.
So I'm going to choose this one, as we can see here.
We can get more details about this device, the type of connection.
And Ethan, it then the IPR, just I.B. IP address vision for you.
And we have the gateway and also we have the D.A..
Now, if I would like to create a new connection.
And also to create a new interface card configuration file.
I can use.
I can do it by using the NMC like Commensal and see I then I'm going to choose connection.
Then after that, at the end, if I don't know what should.
Should do right after her type after add so I can hit.
Tap, tap twice since we're going to create a new connection.
I'm going to choose this one.
Go, Dash.
Name.
So it's called Dash.
Name.
Then I'm going to call this connection my home dash connection.
Then space.
Then after that, what should they do?
I'm going to.
She was the type of the connection, if I don't know what is the type of the connection.
After a comment or the auction type, you say, I'm going to hit that up.
I'm going to choose.
It's a niche.
Then after that, if I don't know what should a job after I can hit that top twice, that is going to
show us a lot of possibilities.
I know exactly what you're what I'm going to choose here.
So I'm going to say no.
Then I'm going to choose the F name.
So the interface name.
So dentifrice name here.
It's e n s.
E.M.S. 33 hit enter.
So we are ready.
As this you can see here the message that we have created a new connection to double check.
I'm going to check for a DC slash sis sis kind of thing.
The network dash scripts hit into Ellis Dash.
As we can see here.
We have the new connection right now.
I have what I have created a new connection.
Now, I would like to assign an IP vision for address and a gateway DNS to this interface.
What should they do?
I'm going to use the command and of I then connection.
And this time I'm going to choose, modify, because I would like to modify this connection.
My homework.
Dash connection.
Then after that, I mean vision for Dutch addresses.
So the idea is I would like to assign to this connection one two one nine two one six eight dot zero
dot one.
Slash twenty four.
Then hit enter.
I can't do the same thing right now, if I would like to add also my homo gateway vision or Gateway.
It's one nine two one six eight.
That's zero.
That two five four.
Then I hit enter.
And right now I'm going to add the DNS modify.
Uh, disconnection IP version for DNS.
And as then the D.A. one.
Nine two, that one six eight dot zero dot to five for it.
Enter.
Now, if I would like to check and see my connection here, I would like to check this connection here.
As we can see over here, we have the D.A. here and we have the IP address and we have the gateway.
In some cases.
If I would like to add another IP address.
To this to the connection or to this connection, so I can do that by typing the MCI connection with
Evi.
And after that, they will defy will will we get to choose the network?
Dan?
I'm going to add plus here, because I would like to.
I would like to add another IP address.
If I didn't add the plus, the system would delete the previous I'd be vision for addressed and add
this one.
But here in this example, I'm going to aband, so I'm going to add another one.
So I the vision for then addresses here.
One Siff and two.
That's sixteen.
That's zero, that's zero.
Then slashed twenty four.
I hate to enter an M.C. Allai connection.
Dan, I'm going to show
the connection just to make sure that we added the second IP address.
As you can see here, we added the second.
I be fair to him for.
172.
So let me check which interface it's active, currently active.
So the connection here and sure, dash dash active as we can see over you.
We have this one.
This one is currently active.
So if I would like to bring.
The previous one and make it active so that the previous one, I mean, like the connection that we
just have created it.
And I would like to make that that connection active and would stop.
So I'm going to type animals.
An M.C. ly den connection.
Then after the conviction, I can if I don't know what you choose.
It popped up.
I can see he up then the name of the network.
Then a hit enter.
Yes, weird, as you can see here, the conviction successfully activates or just let's double check
and see my connection.
Sure.
Dash dash active.
As you can see over here right now, my new connection is active and it's running right now.
That's concludes our session.
Thank you.
And see you the next lesson.