Hello, everyone, and Distomo.
I'm going to show you how to create Stenner partitions.
First step, I need to check a list.
The plot devices, some point to under comment in this block.
As you can see here, we have the blog devices on the left side.
For example, is is D.B. as DC and as Didi, I'm going to use this blog device in order to create standard
partitions.
If I would like to run options with the comment Ellis block, I can't run this option.
Dash Dash.
If s in order to show more information about the block device, for example, we have the five system
type.
We have the label here and we have the user I.D. and we have the Mount Point.
So the idea here is associated with the block device and the same thing he did with the launch point,
the slash board, for example, he is associated with the block device or the partition SDK.
What?
So he has you can see it that is dear has two partitions is the one and is the two.
So would this partition the SDP?
I'm going to create three partitions.
Now let's move on to the next step.
Step two, I'm going to run the command F desk in order to create standard partitions.
F this commandment manipulates the disk partition table.
So I'm going to type first.
I'm going to tap Elice Block.
As I said that I'm going to use this lock device.
This DP.
So f desc then slash dev slash is D, B slash.
So then this block there is DBI comes under the slash dev.
So we have to ride the whole bath to enter.
So you can see here before I would like to get more information or help.
How to use the commands inside the disk.
We got to type in.
There's a shortage for help.
Tenter can see we have those litters and we can use those liters, for example, the D.
If we'd like to data partition L Lorqess a list.
No.
One, partition types.
And and if I would like to add a new partition p if I would like to print a partition table to changed
up the partition type.
And the most important thing we have here is two types.
We have the W, DSW or ice tables to disk and exit and a queue quits without serving changes.
So since I'm going to create a new partition, so I'm going to type in.
Enter.
I'm going to use the default here.
The primary.
Yes.
And also I'm going to use a default here.
Default one.
Yes.
This is going to be the first partition.
The first sector.
I'm not going to type anything because it's going to start the partition from the first sector and the
device.
However, in the last sector, I have to indicate the size in order to create that partition.
So I'm going to type here.
Plus five hundred mega, as we can see here, is plus then the size a number.
Then I can pick one of those kilobyte megabyte or gigabyte a terabyte.
And I had inter then P in order to bring the table partition table.
So can see we have the first partition.
Here is D the one.
Now I'm going to add another partition.
Default, yes.
Its primary is default, two years is a second partition, good first sector.
So the first sector for the second partition is going to start.
After the last sector in the phase, partition.
And we hit enter.
Now, I'm going to mention the size here.
Also, five hundred mega for a second partition hit into.
I will say yes.
Don't be too, Brent.
As you can see over here, I have the D.B., too.
And you can see the size here.
And we have the type.
Now, what I'm going to do, I'm going to cure yet the third one.
So the third partition, the three.
Yes.
And is it so the sector.
And the third partition is going to start after.
The last sector and the second partition.
Now, I want also to give the SAS 500 Maiga for the third one to enter.
I'm going to remove the signature because it has a like five system.
So I don't need that file system.
You're also going to delete it.
Dan, I'm going to type B, as we can see over here.
So what we did for the first, the second and the third we wiped because it has a file system.
So I deleted everything.
So I just created a new three partitions, as we can see.
Or for you.
We have the SD B1 as DP two and SD DBC last thing before I'm going to safe.
If I would like to get I'm going to get more information about.
List knowing partition types, I'm going to tell you.
So if I would like to change that type of that partition, so I'm going to type B, as we can see over
here.
This is the type, if I would like to change it.
So I'm going to, for example, Earl here.
Let's change it.
I'm going to change one of them to pay it to 85.
So I'm going to type T before I want to type to use on what you see here.
Change a partition type.
So I'm going to type T hit enter, then default.
So this is the last partition.
Partition three is DP.
Yes.
Then I'm going to type the code.
Eighty five it entered.
Then B, as you can see here, we have changed the type two lennix extinct.
Extend it.
So but I need to change it back.
I'm just going to give you an example how we can use the T and the L.
So the L if you would like to get the code.
And we can see them beside each cord.
You can see what is what is indicates or represent to.
So I'm going to change it to 83 years.
So I'm going to tag T genter for the different three years, then l I'm going to type 83.
It entered in B, as you can see over here.
We have changed the type two to Lennix again.
Now I have created a three partitions.
The next step I need to see if I'm going to m again, if I don't know how I can save an exit, as you
can see here, right table to exit to the desk and exit.
If I would like to quit without saving, change it.
I'm going to take a cue.
But in our case, I'm going to type W, then hit enter.
As you can see over here, the partition tables has been alert.
It means that we have created it.
Three partition.
So I'm going to double check Dallas Block.
As you can see, we have three new partitions.
HDB one, maybe two, maybe three.
And we have decisis here as less block here.
Dash, Dash Everiss.
So as we can see here, we get to make a fire system for these three partitions.
But before we're going to do that.
Is the third step.
I'm going to run the part to probe comment in order to inform the operating system of partition table
changes.
We need to do that in order to tell the system, the operating system, that we have made changes on
their partition table.
So I'm going to type part prop then the device SD be hit, enter.
Now we have run this command.
We are good to go right now for the fourth step.
Now I'm going to run the make fill a makefile system.
I'm going just before that.
Earlier.
Let's look.
As you can see, of all it is look, dash, dash.
If s as you can see here, we don't have a file system for those three partitions.
So I'm going to make a five system for these three partitions.
So I'm going to run the command make file system.
In order to build a Lennix five system for the day for these partitions, and then I'm going to type
T is a type two to tell the system what is the type of the file system that we want to build for this
partition.
Then I'm going to type the party, the five system type that I would like to assign to this partition.
For example, slash diff slash is the be one.
So I'm going to, as you can see, mic five system identity in order to assign this five system type
to this.
Sorry, sir, to this partition.
I'm going to hit enter.
As you can see here, we have created a new fire system with a 500 megabytes to this partition.
Now I'm going to do it for the next one.
Make our system Dashty.
Dan, I'm going to use the fire system type heat the x t for and I'm going to do it for SBB to this
time had enter.
Perfect.
Now I'm going to do it for the last one.
Dashty then the type x f.
S then slash diff slash sd b three hit enter.
Perfect and will create the screen L as Glock dash dash.
If s as we can see over here, we have created a five system tie for these partitions.
So now let's move on.
What is the fifth step.
The festive.
I need to add the new partitions in the file.
It is a five slash ADC.
Slash every step.
So I need to add the new partitions in this five in order to mount them on the board and on the demand.
So this fired slash EDC, slash EVERIST, every step is a fight, is a system configuration file that
contains all variable.
And available disk disk partitions.
And there are options wherever we add a new disc or re partitions and an existing disc.
We need to modify this fight.
If we want to fix the amount that associated with the partition or the device.
Let's imagine that we want to build a house.
So I consider that the device I'm going just going back here to show you what I'm talking about in this
block.
So as I said, let's imagine that we want to build the house.
So I consider the device here that is D.B..
Is the house.
And I consider the partitions, here is DBE one, is DBI two.
And these DVC.
I consider those are the rooms inside the house.
So right now, I have the house and I have two rooms, and I need to create doors for these storms.
So the doors here, first I'm going to kill it directories in order to.
Let us enter this partitions.
So without a mar cheer, as we can see here on this side, we cannot access these partitions.
So we have the house room.
Now, I'm going to make the doors in order to get into inside these partitions.
So that's why we need to add the demand and use partitions inside the slash.
What?
The slash EDC slash.
If I stop by before I'm going dad, I'm going to create three partitions.
So I'm going to add these three partitions and add a slash Margitza, slash M, M and T.
So the first one would be Linux.
Next one will be empty.
Then the next one would be that it is perfect.
Third line slash amanti slash network.
Interred in c d slash n t less.
As we can see here, you're gonna see we have the three detectors.
Now I'm going to at these doors.
Cindy.
So what I'm saying that this block.
So those three directories that I created them.
So I'm going to mom them in order to get access to these partitions.
So I need to go inside.
Five This came for us.
Then slash ATC, slash F-stop.
And I'm going to add a new line here.
So before I'm going to add a new line, let me explain.
What is the attributes over here?
For example, the first one is the Mount Device, for example, the mount device that I would like to
amount to the first partition def slashed SD beat one.
This is the mount device.
Now, the next one, which I'm going to do is the Mount Point.
The door.
So I have the room here.
Now I have to draw like, sorry, the door, the door of natural.
So I'm going to type that Derek Cheese.
So the phrase directory will be Linux.
Perfect.
Now, the third option here, we have the five system types, or as we know that the five system type
for that for the first partition is E, x, t three.
Then we have the option.
This is the fourth field is the Mt. option.
Just usually we leave, it defaults.
Then we have two valleys here.
Two numbers.
We have the back up operation.
It's used for that dumped to utilize if it's one Dendur dump or two and should should do it should back
up a partition if it's zero.
You don't have to back up the partition, so I'm going to just leave it to you.
Now, the second value, as we can see here, is the file system.
Check order.
So we have the five system check.
That defies or partition for erodes and to put time where we can to rebuild the system, if there is
any problem with the device or anything inside, this fight is going to notify us.
So there is three bodies.
If I'm going to type zero, it means that don't check.
Out if there is in order, don't check if if it's Swon.
Check the partition first, if it's to then shake the partition next.
So I'm going to leave it Zeo.
So this is for the first part to shore up.
Now we have created a demand for that first partition.
Now the second partition, I'm going to use the label.
This is another way.
By the way, either we can use the.
The device or we can use the label or the third.
I'm going to use this as for the third partition.
I'm going to use the U.
U.
I should be uppercase u.
U i.
I do.
So we have three.
Types that we can use for the device or demand device.
Either we use the device namea or we can use the label or you you idee.
I still need to create a new idea and I need to copy the story.
I still need to create the label.
And I'm going to copy the new ideas for the third.
So I'm going just to save and I'm going to come.
I'm going to save this file first.
And I'm going to come back here in order to finish and fill the rest of the options.
Hit enter.
Now, if I would like to create a label, I can run this command E to label.
Then I'm going to tie the partition name as D.
B two.
I said that I'm going to use the label for the SDD, too.
Then space.
I'm going to call this Stan Stander.
Standard number one quote is a standard.
So I'm going to call this.
Partitioned.
Or I'm going to give a label to this partition standard hit enter.
Perfect.
Now for the third partition, what I'm going to do, I would like to get the new ideas, so I'm going
to type the command.
Look, Idee, as you can see here, this is the third partition.
And this is the you you I.D. for that third partition.
So I'm going just to cobie the numbers here between the quotation marks.
I'm going to copy this if I would like to generate.
I.e., A, you your idea for this device.
I can do it like this with you, you I.
D Dan Gynt, which is generate didn't the name of the device as D B three.
Hit enter, as you can see here, we have generated a new you I.D., so I'm going to use this one.
I cannot use the old one anymore because I have generated a new Ubaidi now.
So we have the label, each standard.
And we have what?
We have this is the new I.D. just to double check a..
As you can see here, we already have used this door, the Lennix.
Now we have to use the database.
And we need also to use the network over here.
So we're going to use the database and we're going to use the network.
So I'm going back again here inside slash, ATC slash, if I step it into the level here, I'm going
to type set dirt standard.
OK, I'm going to give the mount heave.
So here is the mount device.
Then we have to see the Mount Point.
So I'm going to give it to the database.
And as we know, that deck that the five of five system time for this database, it's x, t, x, e,
x, t four.
Then we're going to type default, the default.
Then here I'm going to leave it zero zero to enter.
I'm not going to just go here.
So I'm going to paste.
Oh, OK.
I'm going to do it here.
I don't know if a just just double check here one second.
I'm going to pass to you idee here.
Perfect.
Then I'm going to type them out point and A. then.
So the last door or the last directory here is the network.
Then the fire, the fire system.
Time for this partition is X if s, then we going to the default.
Then I'm going to type zero zero and I hit I'm going to say 55.
Here.
Yes, to double check.
So I'm going to type the command to dash.
And then three.
Dan, here is the first step.
Enter, as we can see here.
This is the mine.
But Mollet pointed out we had added game inside if top five.
So the configuration file.
Also, I'm going to use the command L.
S block.
Let's look.
Dash, dash, F.
S.
As we can see over here, we have a defined system times and we have the partitions.
However, even though that we created the Mount Point, we still have one last tip.
We need to do.
We need to modify system that was founded on the disk to the big structure for the Lennix five system
garrotted under a statute.
Okay.
I'm going to do a Mount Dash A.
This is for all.
If there is in know, it will show us if we have anyone inside the slash DC slash of estab, I'm going
to enter.
So we cannot find a you I.D. So I'm going to troubleshoot this one first.
So we're going to do the block I.D., as you can see over here.
So I'm going to copy this one here.
Again, and I'm going to go inside.
If estab just double check here, I'm going to change this one here.
We want to change this one here.
Then I'm going to burst and you want to save the file again.
Go back, then I'm going to type Mount Dash, air it, enter.
Yep.
Perfect.
They don't have in error.
Now, I'm going to type in this look dash dash F.
S.
As we can see over here, we have the mounts.
So here is the mount point.
I mean, look what they explained to you guys before.
This is the doors.
For what?
For the rooms.
And this is the Hoppes, if I would like to.
Unmount any of those?
Let me go inside.
For example, he had a slash ADC slashed stop, for example.
This is the last partitioning, if I would like to unmount this one.
So I'm going just to add the hash here.
Then I have to save the file again here.
And I go back here in what they have to do.
I said unmount.
So this command is going to unmount the device five system.
So the comment is you mount then def s d b three and I hit enter.
Then if I would like to check again.
Ellis' look dash dash.
If s as we can see here, we don't have Mt. Hood or a door for that Chaum anymore.
And if I would like to add agentic back is simple, I just can go back to the fight slash DC slash like
a stop go interview and I'm going to delete the hash over here and I'm going to save the file again
here.
And I'm going to do the mound dash all for all.
And then Ellis Block Dash Dash F.
S As you can see here, we got the Mount Point again.
I hope that's, uh, clear.
And and if I hope that I explain all the concepts about how we can create a standard partitions using
the F disk, then after that to use the bar to probe, then how we can add dismount to to what?
To the slash if we stop.
Just last thing big before I'm going to add decision, just to make it clear.
You guys just think about that.
This is a device I consider just what is like a house and this one is like a room.
And in order to get into this entire this room, we need a door, a directory in order to access this
partition.
That's conclude our session.
Thank you.
I'll see you in the next lesson.