Hello, everyone.
And still, I'm going to show you how to create physical value, good value and you can value.
The main advantage of using logical vacuums management offer standard partitions is study size, increase
or reduce the logical partitions without any problems.
Before I'm going to create anything, I'm going to run the Comac Ellis block in order to check a list
of block devices on my system Pittenger.
As you can see here on the left side, I have all the block devices on my system and I'm going to use
this block device.
SDC, in order to create physical value, grew very unlogical value.
So the first step, I need to create a physical value.
We can create a physical value either on a device.
Or on a partition.
And this deal.
I'm going to create the physical volume on this device, SDC.
So I'm going to type.
P v q yet did the name or the birth of that device hit enter?
As you can see here, we have successfully created this physical value.
Now, if I would like to display information about the physical value of my system, I currently command
P.
S tenter and also there is another command P.
V display.
If I would like to get more information and details about the.
About the physical value, my my system.
So I'm going to if I'm going to take enter is going to show me all the information about this to physical
value.
But I'm going just to type specific physical vacuum it into.
As you can see, we get only information about this physical value.
You can see here the physical volume size.
It's too Gigha.
Now the second step.
I have to create a value group.
So in order to create a violent group.
We need to create it on a physical value.
So I would consider developing group as a single storage.
So in this example or in this demo, we have created one physical.
Vario.
So now we going to curate the value group on that physical value.
So I'm going to type document Viji.
These you create.
Then I'm going to call this one Viji one space.
Then the what is the physical value?
It's the device slash dev, slash SDC.
It enter.
As we can see here, we have successfully created a volume group.
If I would like to display information about the volume group in my system, I can type Ft.
He s it enter and I can also used ICSC.
And this command Viji display.
And if I would like to get all information about a specific value group, for example, of these you
want, I can enter.
As you can see, we have.
Display information only about this value group.
The third step.
I need to kiriat.
A logical value.
So in this example, I'm going to create two logical values.
And in order to kill this to recover, I need to create my own vacuum.
So we take.
We take this step by step.
Physical value that group, then logical value.
So I'm going to read this to logical, very undervalued group.
So I'm going to type the comment, Elvie, create the in dash and in order to indicate a name for this
logical value.
So I'm going to call it Elvie Underscore Department one day in space.
Now I need to use a dash L lowercase.
If I'm gonna use the lowercase.
It means that I need to indicate a percentage of the remaining space on the container of the vetting
group, but I'm going to use the abacus in order to set a fixed size.
So I'm going to give one gigabyte to this value group.
Not sorry to.
To the logical value.
I mean, I have to type the name of the value group.
Hey, Ginger.
Yes.
Perfect.
Now if I want to check if.
And as alive as I can see, here we are.
We have created what one logical value.
I need to get it.
The second one and V create dash.
And so I'm going to call this one.
Elvie underscored deep past.
Me, too.
Then let me let me use.
I'm going to use the dash l the lower case in order to indicate a percentage of the remaining space
in the.
Value group.
So I'm going to type hundreds.
Then the percentage, then uppercase, free.
Then the name of that value group I hit enter.
Yes.
Now I'm going to tap LV s, as you can see over here.
What we have done went back to this.
We have assigned whatever lift on this value group to to the logical value.
So this is what I have left there.
And we have assigned to the second logical value.
Now, the first step, what we need to do, we need to go around, make five system command in order
to build a Lennix five system.
So we need to format these two logical value and make a five system for this to logical final.
So before I'm going to do that, I'm going to say, look, dash, dash, if s as we can see here, we
don't have any five system for this, too.
So I'm going to run the comment on Kiev as then.
I can't do it this way or I can do that e x d for.
Then I'm going to try deaf then.
The name of the rythm grouped in the name of the musical value hit Enter.
Perfect for the second one.
I'm going to do the same thing.
The only difference I'm going just to type Dashty.
The x g for it.
Enter.
Perfect.
Now I'm going to another common alias block dash dash.
If s as we can see here right now we have a five system time for these two.
No she can't.
Values.
Now, after we have created the physical group and the value group and illogical values, we need to.
Make a mild point.
In order to access these two as you can.
So we have the the device, which is the house, the logical volumes here, we can consider them as
rooms.
Now we have to create the doors in order to access these two logical values.
So I'm going to do the directory, Alice, so I don't.
I'm going to create two a directory here, department to one and department to.
As I can see over to you.
Created to Derek choose right now in order to make a mount point.
So the next thing or the fifth step I need to at.
Daniel Logical Valiums.
And slash DDC, slash the staff in order to make a mount point.
Oh, so I'm going to try my own device here if you want.
Then there are the underscore department.
What then?
I have to.
Tied up Mount Point that we would like to assign to this logical value and department to one five system.
X, g four.
Then default.
So therefore, C, then zero zero.
Next one.
I'm going to use the user I.D..
Let me save the file first.
And I'm going back here.
Look, I.D..
So I'm going to do it for this one here.
So I'm going to copy this.
You I.D..
And I'm going to go back again.
Paiste now is the amount point department to Dan to tie the fire system tied for defaults.
Zero zero.
We have done X.
Claire.
You're under command, tell us.
And the last two lines.
If I step it into as we can see here, this is the two lines that we have added them and side.
This the configuration fight in order to make a mount point two.
But we have to run the command mount in order to double check that everything is fine.
Then we can create Dumar 2.8 Inter.
Perfect.
We didn't get an error, so I'm going to run the command again here.
As you can see here, here we got the mount point to this to logical values, but also that if I would
like to get more information about the mountain, you can get the grip then and t can get here on formation,
on the mount, about the devices.
Here is the partitions that we have created them before.
And here is the two logical volumes that we have created in this session.
Does conclude our session.
Thank you.
And see you in the next lesson.